Getting started with the AIRIS PUREFLOW SWITCH is quick and simple. Before your first puff, there are just a few easy setup steps to make sure the device is activated properly and ready to perform as intended.

This guide walks you through how to use the AIRIS PUREFLOW SWITCH, from removing the protective stickers to installing the pod and adjusting the airflow.

How to Set Up the AIRIS PUREFLOW SWITCH

Step 1: Peel off the sticker on the bottom

Start by removing the sticker on the bottom of the device.

This sticker is designed to prevent the magnetic contact points from touching during storage and shipping, which helps avoid unwanted power discharge before first use. Once removed, the device can connect properly and function as intended.

Step 2: Remove the sticker on the pod section

Next, peel off the sticker on the pod section.

This protective sticker covers the pod connection area before use. Make sure it is removed completely so the pod can connect and operate properly.

Step 3: Remove the pull ring

After that, remove the pull ring from the pod.

This step prepares the pod for use. Make sure the pull ring is fully removed before moving on to installation.

Step 4: Press firmly until it clicks into place

Once the pull ring has been removed, press the pod firmly into the device until it clicks into place.

That click confirms the pod is installed correctly and securely connected.

Step 5: Adjust the Stepperless Airflow Control

The AIRIS PUREFLOW SWITCH features stepperless airflow control, allowing you to fine-tune the draw to match your personal preference.

You can slide the airflow control to adjust the feel of each puff:

• Open it more for a looser, smoother draw
• Close it slightly for a tighter, more restricted draw

This gives you more flexibility and helps you customize the experience based on how you like to vape.

Final form

How to Start Using the AIRIS PUREFLOW SWITCH

Once the bottom sticker is removed, the pod sticker is peeled off, the pull ring is taken out, and the pod clicks firmly into place, your AIRIS PUREFLOW SWITCH is ready to use.

Simply inhale through the mouthpiece and enjoy.

The setup process is straightforward and beginner-friendly, making the AIRIS PUREFLOW SWITCH an easy option for adult users who want a smooth and convenient start.

Tips for First-Time Use

To get the best experience from your AIRIS PUREFLOW SWITCH, keep these simple tips in mind.

Make sure all protective parts are removed

If the device is not working as expected, double-check that the bottom sticker, pod sticker, and pull ring have all been removed completely.

Confirm the pod is fully installed

A loose pod connection may affect performance. Press the pod in firmly until you hear or feel the click.

Fine-tune the airflow

Take a few puffs and adjust the airflow gradually until you find the draw that feels right for you.

Store the device properly

Keep your device in a cool, dry place and avoid exposing it to extreme heat or direct sunlight.